User's Manual

Software (Menu 8-3)

Displays the phone's software release.

Information on the SIM card (Menu 8-4)

Displays, in succession, the phase (1 or 2) of the SIM followed by the country's

code (MCC) and the GSM network code (MNC) on which the issuing operator

operates.

Total life (Menu 8-5)

Displays the total time of the calls sent and received by the phone. This figure

cannot be reset.

Security (Menu 9)

PIN (Menu 9-1)

This function makes it possible, by changing PIN1 and PIN2, to personalize

the PIN with 4-8 digits. If the SIM allows it, there is also the “Use PIN” option

(9-1-3) to enable or disable the request for the PIN when switching on.

Phone (Menu 9-2)

Access to this submenu depends on correctly entering the security code set by

the manufacturer as 000000.

On entering the security code number (shown as asterisks), confirmed with

, there are the following options: “Type” (9-2-1) to turn on and off the

request for the security code when switching on or to have the phone work

with just one of the last 10 SIM cards inserted; “Delete List” (9-2-2) to delete

the list of the last 10 SIM cards inserted; “New Code” (9-2-3) to change the

code to access this menu; “Autoblock” (9-2-4) to turn automatic block on and

off, changing the relevant code (factory setting 1 2 3). With the “Use default”

option (9-2-5) all the factory settings are restored.

Call block (Menu 9-3)

This network service makes it possible to block “Outgoing calls” (in detail: all

“Outgoing calls”, calls “Abroad” and “Only domestic” calls) and “Incoming

calls” (in detail: “Incoming calls” and calls “Abroad”).

With the “Delete” option (9-3-3) it is possible to cancel the various types of call

block set beforehand, after entering the security code and then pressing

.

All attempts at activating call blocking depend on entering a 4-digit code,

residing in the SIM card memory and therefore provided by the network

operator.

With ”New Code” (9-3-4) it is possible to enter a new code to access call

blocking.