User's Manual

69
Send number (Menu 6-4)
This network service makes it possible, for all outgoing calls, to choose
whether to
“Send” (6-4-1), “Not send” (6-4-2) your phone number or, with “Automatic”
(6-4-3), to leave the network setting unaltered.
On the contrary to calls, EMS/SMS messages ALWAYS contain the sender's
number.
Clock (Menu 7)
Adjustment (7-1)
This function sets in sequence: the time (always displayed at top right of the
display) and, after confirming, the date and day of the week.
To pass from one value to another, press ; change the values with
 and ; confirm with .
Alarm (Menu 7-2)
Use this menu to set the time for the alarm, then to turn it on or off. Increase
and decrease the hours and minutes with  and .
When the alarm rings, press any key; when asked “Switch on?” press 
to turn on the phone, or  to leave it off.
Note: The alarm clearly stays in operation even with the phone switched off
(you should remember this when travelling by airplane and the alarm might
ring).
Date format (Menu 7-3)
This function sets the format of the date to the European system (days-months-
year: menu 7-3-1) or American system (months-day-year: menu 7-3-2).
Information on the phone (Menu 8)
Personal number (Menu 8-1)
This function makes it possible to display your own phone number stored on
the SIM card. If the number fails to appear or has to be changed, enter the
number (or edit with ) and confirm.
IMEI (Menu 8-2)
Displays the phone's serial number. If your phone gets stolen, communicate
this number (printed on a label on the sales package – which should therefore
be kept) to the network operator or service provider to block use of the phone
on the GSM networks that provide this service.