Hardware Manual
Table Of Contents
- WE865-DUAL Hardware User Guide
- Contents
- 1 Overview
- 2 Mechanical description
- 3 Pin-out
- 4 Electrical description
- 5 Thermal design guidelines
- 6 PCB layout design guidelines
- 7 Antenna
- 8 Integration with the GE863-PRO3
- 9 WE865-DUAL - Evaluation kit
- 10 Mounting the WE865-DUAL on the application board
- 11 Moisture sensitivity
- 12 Conformity assessment issues
- 13 Safety recommendations
- 14 Document change log
WE865-DUAL HW User Guide
1vv0300787 Rev. 1 - 03/10/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 5 of 48
DISCLAIMER
The information contained in this document is proprietary information of Telit Communications S.p.A.
including its affiliates (“TELIT”). The contents are confidential and any disclosure to persons other than
the Officers, employees, agents or subcontractors of the owner or licensee of this document, without
the prior written consent of Telit, is strictly prohibited.
Telit makes every effort to ensure the quality of the information it makes available. Notwithstanding the
foregoing, Telit does not make any warranty as to the information contained herein, and does not
accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the
information.
Telit disclaims any and all responsibility for the application of the devices characterized in this
document, and notes that the application of the device must comply with the safety standards of the
applicable country, and where applicable, with the relevant wiring rules.
Telit reserves the right to make modifications, additions and deletions to this document due to
typographical errors, inaccurate information, or improvements to programs and/or equipment at any
time without a notice. Such changes will, nevertheless be incorporated into new editions of this
document.
All rights reserved.
© 2008 Telit Communications S.p.A.