Hardware Manual
Table Of Contents
- WE865-DUAL Hardware User Guide
- Contents
- 1 Overview
- 2 Mechanical description
- 3 Pin-out
- 4 Electrical description
- 5 Thermal design guidelines
- 6 PCB layout design guidelines
- 7 Antenna
- 8 Integration with the GE863-PRO3
- 9 WE865-DUAL - Evaluation kit
- 10 Mounting the WE865-DUAL on the application board
- 11 Moisture sensitivity
- 12 Conformity assessment issues
- 13 Safety recommendations
- 14 Document change log
WE865-DUAL HW User Guide
1vv0300787 Rev. 1 - 03/10/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 32 of 48
9 WE865-DUAL - Evaluation kit
The WE865-DUAL can be provided with an evaluation/testing kit.
The kit consists of:
• EVK-PRO
3
evaluation kit for GE863-PRO
3
module
(EVK-PRO
3
main board + GE863-PRO
3
interface board)
• WE865-DUAL interface board
In such a case, the WE865-DUAL module is directly soldered on its interface board. The figure below
shows how the boards must be assembled in order to allow the system working.
Figure 12
All the boards are connected each other via 40-pins connectors.
The core of the evaluation system is the EVK-PRO
3
EVALUATION KIT, which can be split into several
functional blocks depending on the implemented function. Refer to the “EVK-PRO
3
User Guide” for
additional information on the EVK-PRO
3
description and usage.
EVK-PRO
3
main board
GE863-PRO
3
interface board
WE865-DUAL interface board