Hardware Manual
Table Of Contents
- WE865-DUAL Hardware User Guide
- Contents
- 1 Overview
- 2 Mechanical description
- 3 Pin-out
- 4 Electrical description
- 5 Thermal design guidelines
- 6 PCB layout design guidelines
- 7 Antenna
- 8 Integration with the GE863-PRO3
- 9 WE865-DUAL - Evaluation kit
- 10 Mounting the WE865-DUAL on the application board
- 11 Moisture sensitivity
- 12 Conformity assessment issues
- 13 Safety recommendations
- 14 Document change log
WE865-DUAL HW User Guide
1vv0300787 Rev. 1 - 03/10/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 22 of 48
4.3.2 Manual reset
An active low manual reset (MR_RESET*, ball C1), see the table below for the allowed voltage levels.
As the pin is internally pulled-up, do not drive the signal during normal operation.
The signal must be asserted for a period greater than 1ms.
VOLTAGE LEVELS @ 25 °C
Min [V] Max [V] Remark
VIL -0,3 0,825
Table 10
Figure 8
WE865-DUAL
MR_RESET*