User's Manual

UE910 V2 Hardware User Guide

1VV0301065 Rev.1 – 2013-12-12

16. Safety Recommendations

READ CAREFULLY

Be sure the use of this product is allowed in the country and in the environment required. The use of

this product may be dangerous and has to be avoided in the following areas:

 Where it can interfere with other electronic devices in environments such as hospitals, airports,

aircrafts, etc.

 Where there is risk of explosion such as gasoline stations, oil refineries, etc. It is the

responsibility of the user to enforce the country’s regulations and the specific environmental

regulation.

Do not disassemble the product; any evidence of tampering will compromise the warranty validity.

Follow the instructions of the hardware user guides for a correct wiring of the product. The product

has to be supplied with a stabilized voltage source and the wiring has to conform to the security and

fire prevention regulations. The product has to be handled with care, avoiding any contact with the

pads because electrostatic discharges may damage the product itself.

The system integrator is responsible for the functioning of the final product; therefore, care has to be

taken with the external components of the module as well as of any project or installation issue

because of the risk of disturbing the GSM/WCDMA network or external devices or having impact on

security. Should there be any doubt, please refer to the technical documentation and the regulations in

force. Every module has to be equipped with a proper antenna with specific characteristics. The

antenna has to be installed with care in order to avoid any interference with other electronic devices

and has to guarantee a minimum distance from the body (20 cm). In case this requirement cannot be

satisfied, the system integrator has to assess the final product against SAR regulations.