User's Manual

UE910 V2 Hardware User Guide
1VV0301065 Rev.1 – 2013-12-12
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 11 of 67
2. General Product Description
2.1. Overview
The aim of this document is the description of typical hardware solutions useful for developing a
product with the Telit UE910 V2 module.
In this document all the basic functions of a mobile device will be taken into account; for each one of
them a proper hardware solution will be suggested and eventually the wrong solutions and common
errors to be avoided will be evidenced. Obviously this document cannot embrace all hardware
solutions and products that may be designed. Avoiding the discussed wrong solutions must be
considered as mandatory. While the suggested hardware configurations must not be considered
mandatory, the information given must be used as a guide and a starting point for properly developing
a product with the Telit UE910 V2 module.
NOTE:
The integration of the GSM/GPRS/EGPRS/WCDMA/HSDPA UE910 V2 module within a user
application must be done according to the design rules described in this manual.
The information presented in this document is believed to be accurate and reliable. However, no
responsibility is assumed by Telit Communication S.p.A. for its use, such as any infringement of
patents or other rights of third parties. No license is granted by implication or otherwise under any
patent rights of Telit Communication S.p.A. other than for circuitry embodied in Telit products. This
document is subject to change without notice.