User's Manual

UE866 HARDWARE USER GUIDE 1vv0301157 Rev.7 • 2015-04-17 58 of 68
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
9.4 Stencil
Stencil’s apertures layout can be the same of the recommended footprint (1:1), we suggest a
thickness of stencil foil ≥ 120 µm.
9.5 Solder paste
Item
Lead Free
Solder Paste
Sn/Ag/Cu
We recommend using only “no clean” solder paste in order to avoid the cleaning of the modules after
assembly.
9.6 Solder reflow
Recommended solder reflow profile: