Manualshelf

User's Guide

ManualsBrandsTelit Communications ManualsElectronicsGSM 850, E-GSM 900, DCS 1800, PCS 1900, FDD IV, 2G/3.5G module
61626364656667686970
UC864-E-AUTO / AWS-AUTO Hardware User Guide
1vv0300795 Rev.11 – 2010/11/18
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 66 of 78
14. Mounting the module on your board
Mounting the module on your boardMounting the module on your board
Mounting the module on your board
The position of the Molex board-to-board connector and pin 1 are shown in the
following picture.
NOTE:
NOTE: NOTE:
NOTE:
The Metal taps present on UC864-E-AUTO / AWS-AUTO must be connected to GND
This module could not be processed with a reflow