User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 70 of 202
5.3.7.11 S30 - disconnect inactivity timer
S30 –disconnect inactivity timer
Execute command
Read command
Write command
ATS30 = <min>
Defines the inactivity timeout timer value in minutes. The Device disconnects
if no characters are exchanged for a time period of at least S30 minutes.
Parameter:
<min> - 0-127 minutes
<min> = 0 - means inactivity timer disabled, hence no disconnect on
inactivity feature is enabled.
Note: Default is 0
Test command
Example
Reference
SW release Version A
5.3.7.12 S38 - delay before forced hang up
S38 –delay before forced hang up
Execute command
Read command
Write command
ATS38 = <sec>
Defines the time in seconds that the device waits after a hang up command for
transmit buffer to be emptied. 255 value means that disconnecting is done only
after complete buffer upload.
Parameter: <sec> - 0-255 s
Note: Default is 20 s
Test command
Example
Reference
SW release Version A