User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 68 of 202
5.3.7.7 S7 - wait time for carrier, silence or dial tone
S7 – wait time for carrier, silence or dial tone
Execute command
Read command
Write command
ATS7 = <sec>
S7 sets the length of time in seconds that the device will wait for carrier before
hanging up the call. The timer is started when the device finishes dialing
(originate), or 2 seconds after going off-hook.
Parameter: <sec> - 1-255
Note: Default is 60 seconds
Test command
Example
Reference V25ter
SW release Version A
5.3.7.8 S10 - lost carrier to hang up delay
S10 – lost carrier to hang up delay
Execute command
Read command
Write command
ATS10 = <time>
S10 defines the maximum time allowed to a carrier loss before disconnecting.
Parameter: <time> - tenth of seconds 1-255
Note: default is 50 (5 seconds).
Test command
Example
Reference V25ter
SW release Version A