User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 66 of 202
5.3.7.3 S2 - escape character
S2 – escape character
Execute command
Read command
Write command
ATS2 = <char>
S2 holds the decimal value of the ASCII character used as escape character.
This command sets this character equal to <char>.
Parameter: <char> - escape character 0-255
Note: The escape sequence consists of three escape characters preceded by n
ms of idle and followed by m ms of idle.
Test command
Example
Reference
SW release Version A
5.3.7.4 S3 - carriage return character
S3 – carriage return character
Execute command
Read command
Write command
ATS3 = <char>
Sets the command line and result code terminator character in decimal
ASCII.
Parameter: <char> - carriage return character 0-127
Note: Default 13 (Carriage Return)
Test command
Example
Reference V25ter
SW release Version A