User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 60 of 202
5.3.3.7 O - return to On Line Mode
O – return to on line mode
Execute command
ATO
It is used return to On-line mode from command mode. If there's no connection active
returns ERROR.
Note: After the issue of this command, if the device is in conversation, to send other
commands to the device you must return to command mode by issuing the escape sequence
or lowering DTR if &D1 option is active.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A
5.3.3.8 &G - guard tone
&G – guard tone
Execute command
AT&G
It is has no effect is included only for backward compatibility with landline modems.
Read command
Write command
Test command
Example
Reference
SW release Version A