User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 58 of 202
5.3.3.2 T - set tone dial
T – set tone dial
Execute command
ATT
It has no effect is included only for backward compatibility with landline modems.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A
5.3.3.3 P - set pulse dial
P – set pulse dial
Execute command
ATP
It has no effect is included only for backward compatibility with landline modems.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A
5.3.3.4 A - answer
A – answer
Execute command
ATA
It is used to answer to an incoming call if automatic answer is disabled.
Note: This command MUST be the last in the command line and must be followed
immediately by a <CR> character.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A
5.3.3.5 A/ - Last command automatic repetition
A/ – last command automatic repetition
Execute command
A/
It is used to execute again the last received command.
This command works only at fixed IPR.
Note: This command has been substituted with AT#/ command.
Refer to #/ command reference.
Read command
Write command
Test command
Example
Reference