User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 54 of 202
5.3.2.13 +ILRR - DTE - modem rate reporting
+ILRR – DTE-modem rate reporting
Execute command
Read command
AT+ILRR?
Returns active setting of port speed rate reporting information.
Write command
AT+ILRR = <n>
Controls whether or not the +ILRR:<rate> information text is transmitted from
the TRIZIUM to the DTE.
Parameter:
<n> = 0 - local port speed rate reporting disabled
<n> = 1 - local port speed rate reporting enabled
Note: this information if enabled is sent upon connection.
Test command
AT+ILRR=?
Returns all supported values of the parameter <n>
Example
Reference V25ter
SW release Version A