User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 41 of 202
5.3.1.7 &N - display internal phonebook stored numbers
&N – display internal phonebook stored numbers
Execute command
AT&N <n>
Returns the telephone number stored in the internal memory at the record number <n>.
Parameter: <n> - phonebook record
Note: if parameter <n> is omitted then all the internal records are shown.
Read command
Write command
Test command
Example
Reference
SW release Version A
5.3.1.8 +GMI - request manufacturer identification
+GMI – request manufacturer identification
Execute command
AT+GMI
Returns the manufacturer identification.
Read command
Write command
Test command
Example
Reference V.25ter
SW release Version A
5.3.1.9 +GMM - request model identification
+GMM – request model identification
Execute command
AT+GMM
Returns the model identification.
Read command
Write command
Test command
Example
Reference V.25ter
SW release Version A
5.3.1.10 +GMR - request revision identification
+GMR – request revision identification
Execute command
AT+GMR
Returns the software revision identification.
Read command
Write command
Test command
Example
Reference V.25ter
SW release Version A
5.3.1.11 +GCAP - request capabilities list
+GCAP – request capabilities list
Execute command
AT+GCAP
Returns the equipment supported command set list.