User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 38 of 202
5.3 Hayes Compliant AT Commands
5.3.1 Generic Modem Control
5.3.1.1 &F - restore factory configuration
&F – restore factory configuration
Execute command
AT&F
Calls the factory configuration, resetting the default profile.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A
5.3.1.2 Z - soft reset
Z – soft reset
Execute command
ATZ <n>
Send a software reset to device, loading on the configuration the specified default profile.
Parameter: <n > = 0…1 - profile
Note: Must be the last command on the line.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A