User's Manual
Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 29 of 202
3 Evaluation Kit
In order to assist you in the development of your Telit TRIZIUM module based application, Telit can supply an Evaluation
Kit (same as used for the GM862 family, with a dedicated adaptor) with appropriate power supply, SIM card housing,
RS 232 serial port level translator, direct UART connection, Handset, Headset and Hands-free (car kit) audio, antenna.
The EVK provides a fully functional solution for a complete data/phone application.
The standard serial RS232 9 pin connector placed on the Evaluation Kit allows the connection of the
EVK system with a PC or other DTE.
The development of the applications utilizing the Telit TRIZIUM module must present a proper design
of all the interfaces towards and from the module (e.g. power supply, audio paths, level translators),
otherwise a decrease in the performances will be introduced or, in the worst case, a wrong design
can even lead to an operating failure of the module.
In order to assist the hardware designer in his project phase, the EVK board presents a series of
different solutions, which will cover the most common design requirements on the market, and
which can be easily integrated in the OEM design as building blocks or can be taken as starting
points to develop a specific one.
TRIZIUM Evaluation Kit (adaptor not shown)