User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 187 of 202
5.9.2.4 #EPASSW – Email authentication PASSWORD
6.10.2.2 #EPASSW – Email authentication PASSWORD
Execute command
Read command
Write command
AT#EPASSW="<e-pwd>"
This command sets the user identification string to be used during the
authentication step of the SMTP to be the string <user>.
Parameter:
<e-pwd> - authentication Password for Email
- any string value up to max length reported in the Test command.
By default ""
Test command
AT#EPASSW=?
Returns the maximum allowed length of the string parameter <e-pwd>.
Example AT#USERID = "myPassword"
OK
Reference
Telit specifications
Note
If no authentication is required then the e-pwd parameter shall be
empty "".
Note that it is a different pwd field than the one used for GPRS
authentication (see AT#PASSW).
SW release
Version A