User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 186 of 202
5.9.2.3 #EUSER – Email authentication USER NAME
6.10.2.2 #EUSER – Email authentication USER NAME
Execute command
Read command
AT#EUSER?
Reports the current value of the parameter
<e-user>
Write command
AT#EUSER="<e-user>"
This command sets the user identification string to be used during the authentication
step of the SMTP to be the string <e-user>.
Parameter:
<e-user> - authentication User ID for email
- any string value up to max length reported in the Test command.
By default ""
Test command
AT#EUSER=?
Returns the maximum allowed length of the string parameter <e-user>.
Example AT#USERID = "myE-Name"
OK
AT#USERID?
#USERID: "myE-Name"
OK
Reference
Telit specifications
Note
If no authentication is required then the e-user parameter shall be
empty "".
Note that it is a different user field than the one used for GPRS
authentication (see AT#USERID).
SW release
Version A