User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 184 of 202
5.9.2 Email management
5.9.2.1 #ESMTP – Email SMTP server
6.10.2.1 #ESMTP – Email SMTP server
Execute command
Read command
AT#ESMTP?
Reports the current value of the parameter
<smtp>
Write command
AT#ESMTP="<smtp>"
This command sets the SMTP server used for EMAIL sending.
SMTP server can be specified as IP address or as nick name.
Parameter:
<smtp> - SMTP server address
this parameter can be either:
- any valid IP address in the format: xxx.xxx.xxx.xxx
- any host name to be solved with a DNS query in the format: <host name>
Test command
AT#ESMTP=?
Returns the max character length for the parameter.
Example AT#ESMTP="smtp.mydomain.com"
OK
Reference
Telit specifications
Note
The SMTP server used shall be inside the APN space (the smtp server
provided by the network operator) or it must allow the Relay,
otherwise it will refuse to send the email.
SW release
Version A