User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 182 of 202
5.9.1.7 #CAMQUA – Camera Select Quality of Photo
#CAMQUA - Camera Select Quality of Photo
Execute command
Read command
AT#CAMQUA?
Reports the current value of the parameter <qual>
Write command
AT#CAMQUA=<qual>
This command sets the quality of the photo stored on the memory of the TRIZIUM
Parameter:
<qual> - photo quality
0 - low (Jpeg compression high - low quality of picture)
1 - medium (Jpeg compression medium - med. quality of picture)
2 - high ( Jpeg compression low - high quality of picture) - default
Test command
AT#CAMQUA=?
Returns the allowed values for the parameters.
NOTE Increasing the photo quality increases its size.
Example AT#CAMQUA=2
OK
Reference
Telit specifications
SW release
Version A