User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 178 of 202
5.8.4.10 #SKTRST – Socket Parameters Reset Command
#SKTRST – Socket Parameters Reset Command
Execute command
AT#SKTRST
Resets the actual Parameters of the Socket in the NVM of the device to the default
ones.
The values reset are:
- User Name (none)
- Password (none)
- Packet Size
- Socket inactivity timeout
- Data sending timeout
- Socket type (UDP/TCP)
- Remote port (none)
- Remote address (none)
Read command
Write command
Test command
Example AT#SKTRST
OK
…socket parameters have been reset
Reference
Telit specifications
SW release
Version A