User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 174 of 202
5.8.4.5 #SKTTO – Socket inactivity timeout control
#SKTTO – Socket inactivity timeout control
Execute command
Read command
AT#SKTTO?
Reports the current value of the parameter <time>.
Write command
AT#SKTTO=<time>
This timeout applies when the no data is exchanged in the socket for a long time and
therefore the socket connection is automatically closed and the GPRS context
deactivated.
This command sets the maximum time that the module awaits without data exchange
on the socket before closing the socket and deactivating the GPRS context.
Parameter:
<time> - socket inactivity timeout in seconds units
0 - no timeout.
1…65535 s
Test command
AT#SKTTO=?
Returns the allowed values for the parameter <time>.
Example AT#SKTTO = 30 ( 30 sec. Timeout )
OK
AT#SKTTO?
#SKTTO: 30
OK
Reference
Telit specifications
SW release
Version A