User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 172 of 202
5.8.4.3 #PKTSZ –Packet Size control
#PKTSZ –Packet Size control
Execute command
Read command
AT#PKTSZ?
Reports the current value of the parameter <size>.
Write command
AT#PKTSZ=<size>
This command sets the default packet size to be used by the TCP/UDP/IP stack for
data sending.
Parameter:
<size> - packet size in bytes
0 - automatically chosen by the device
1…512 - packet size in bytes
Test command
AT#PKTSZ=?
Returns the allowed values for the parameter <size>.
Example AT#PKTSZ = 100
OK
AT#PKTSZ?
#PKTSZ: 100
OK
Reference
Telit specifications
SW release
Version A