User's Manual

Telit TRIZIUM Product Description

80264ST10007a Rev. 4– 09/09/04

2.11.12 Indication of network service availability

By AT commands and LED indication on dedicated output.

The STAT_LED is an Open Collector output where it is possible to directly connect a LED to show information on the

network service availability and Call status.

STAT_LED indications

LED status Device Status

permanently off device off

fast blinking

(period 1s, Ton 0,5s)

Net search / Not

registered / turning off

slow blinking

(period 3s, Ton 0,3s)

Registered full service

Permanently on a call is active

2.11.13 Automatic answer (Voice, Data or FAX)

After n (depends of settings) rings automatically answers with beep (see S0 param).

2.11.14 Supplementary services (SS)

• Call Barring,

• Call Forwarding,

• Calling Line Identification Presentation (CLIP),

• Calling Line Identification Restriction (CLIR),

• Call Waiting, other party call Waiting Indication,

• Call Hold, other party Hold / Retrieved Indication,

• Closed User Group supplementary service (CUG),

• Advice of Charge,

• Unstructured SS Mobile Originated (MO)

2.11.15 Acoustic signaling

The acoustic signalling of Telit TRIZIUM module on the selected acoustic device are the following:

• Call waiting;

• Ringing tone;

• SMS received tone;

• Busy tone;

• Power on/off tone;

• Off Hook dial tone;

• Congestion tone;

• Connected tone;

• Call dropped;

• No service tone;

• Alarm tone.

2.11.16 DTMF tones

DTMF tones managed by specific AT commands.

These tones are generated with AT commands only during voice calls.