User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 157 of 202
5.6.1.21 #SMOV – SMS Overflow
#SMOV – SMS overflow
Execute command
Read command
AT#SMOV?
Return the current status in the format: #SMOV: <mode>.
Write command
AT#SMOV= <mode>
Enable the signalling of SMS overflow
Parameter:
<mode> = 0 - disable
<mode> = 1 - enable
If enable, when the maximum storage capacity has came, the
#USMO:<memo> network initiated notification is send.
Test command
AT#SMOV=?
Returns the supported range of values of the parameter <mode>.
Example
Reference Telit TRIZIUM AT Command Specification
SW release Version A
5.6.1.22 #SHFEC – Set Handsfree echo canceller
#SHFEC – set handsfree echo canceller
Execute command
Read command
AT#SHFEC?
Return the current status in the format: #SHFEC: <mode>.
Write command
AT#SHFEC= <mode>
Set echo canceller on audio handsfree output.
Parameter <mode>:
0 - disable echo canceller for headset mode (default)
1 - enable, setting for handsfree mode
2…255 reserved
Note: This setting returns to default after power off.
Test command
AT#SHFEC=?
Returns the supported range of values of the parameter <mode>.
Example
Reference Telit TRIZIUM AT Command Specification
SW release Version A