User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 155 of 202
AT#QSS = <mode>
Set the type of notification.
If enabled (mode = 1) at any status change is send:
#USS: <status>
Parameter: <mode>
Test command
AT#QSS=?
Returns the supported range of values of the parameter <mode>.
Example
Reference Telit TRIZIUM AT Command Specification
SW release Version A