User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 153 of 202
5.6.1.17 #ADC – Read Analog/Digital Converter input
#ADC – Read Analog/Digital Converter input
Execute command
Read command
AT#ADC?
Reports the read value on the input pin ADC after Analog to Digital conversion in
the format:
#ADC: <value>
where
<value> - the Digital number representing the analog value of the voltage on the
ADC_IN pin.
Note: The command returns the last valid measure.
Write command
Test command
Example
Reference Telit TRIZIUM AT Command Specification
SW release
Version B