User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 145 of 202
5.6.1.9 #STM - Signalling Tones Mode
#STM – signalling tones mode
Execute command
Read command AT#STM?
Reports the current signaling tones status in the format:#STM: <mode>
Write command
AT#STM = <mode>
Enables/disables the signaling tones output on the audio path selected with #SRP
command
Parameter :
<mode> - signaling tones status
<mode> = 0 - signaling tones disabled
<mode> = 1 - signaling tones enabled
Test command
AT#STM=?
Reports supported range of values for <mode> parameter.
Example
Reference Telit TRIZIUM AT Command Specification
SW release
Version A
5.6.1.10 #PCT – display PIN Counter
#PCT – display PIN counter
Execute command
Read command AT#PCT?
Reports the PIN/PUK or PIN2/PUK2 input remaining attempts, depending on
+CPIN requested password in the format:
#PCT:<n>
Note: If +CPIN requires the PIN then max 3 attempts are allowed,
after that the PUK code is requested; if even PUK is input wrong for
other three time then #PCT:0 and SIM remains blocked.
Write command
Test command
Example
Reference Telit TRIZIUM AT-GPRS Command Specification
SW release
Version A