User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 144 of 202
5.6.1.8 #SRP –Select Ringer Path
#SRP – select ringer path
Execute command
AT#SRP=<n>
Selects the audio path towards whom sending ringer sounds and all signaling tones.
Parameter:
<n> - Ringer path number
0 - sound output towards current selected audio path (see command
#CAP)
1 - sound output towards handsfree
2 - sound output towards headset
3 - sound output towards Buzzer Output pin GPIO7
Note: In order to use the Buzzer Output an external circuitry must be added to drive
it properly from the GPIO7 pin, furthermore the GPIO7 pin direction must be set to
Buzzer output (Alternate function) see command #GPIO.
Read command AT#SRP?
Reports the current ringer path setting in the format: #SRP:<n>.
Write command
Test command
AT#SRP=?
Reports the supported values for the parameter <n>.
Example
AT#SRP=?
#SRP=(0-3)
OK
AT#SRP=3
OK
Reference Telit TRIZIUM AT Command Specification
SW release
Version A