User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 142 of 202
5.6.1.5 #CIMI - request international mobile subscriber identity (IMSI)
#CGSN – request international mobile subscriber identity (IMSI)
Execute command
AT#CIMI
Returns the international mobile subscriber identity, identified as the IMSI
number, with command echo.
Read command
Write command
Test command
Example
Reference Telit TRIZIUM AT Command Specification
SW release Version A
5.6.1.6 #CAP - Change Audio Path
#CAP – change audio path
Execute command
AT#CAP = <n>
Switches the active audio path depending on parameter <n>
Parameter:
<n> audio path
0 - audio path follows the Axe input (default at start up):
Axe = low - handsfree enabled
Axe = high - internal path enabled
1 - enables handsfree external mic/ear audio path
2 - enables internal mic/ear audio path
Note: The audio path are mutually exclusive, enabling one disables the other.
When changing the audio path, the volume level is set at the previously stored value
for that audio path. (see AT+CLVL).
Read command AT#CAP?
Reports the active audio path in the format: #CAP: <n>.
Write command
Test command
AT#CAP=?
Reports the supported values for the parameter <n>.
Example
Reference Telit TRIZIUM AT Command Specification
SW release
Version A