User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 123 of 202
5.5 ETSI GSM 07.05 AT Commands for SMS and
CB services
5.5.1 General configuration
5.5.1.1 +CSMS - select message service
+CSMS – select message service
Execute command
Read command
AT+CSMS?
Reports the value of the current parameters in the format:
+CSMS: <service>,<mt>,<mo>,<cb>
where:
<service> - message syntax
0 - SMS syntax as defined in GSM-03.40 and GSM-03.41. AT commands are
compatible with GSM 07.05 Phase 2.
1 - SMS syntax as defined in GSM-03.40 and GSM-03.41. AT commands are
compatible with GSM 07.05 Phase 2+
<mt> - Mobile Terminated Messages
<mo> - Mobile Originated Messages
<cb> - Cell Broadcast Messages
0 - not supported
1 - supported
Write command
AT+CSMS = <service>
Selects the SMS & CB services command syntax.
Parameter:
<service> = 0 - SMS syntax as defined in GSM-03.40 and GSM-03.41. AT
commands are compatible with GSM 07.05 Phase 2.
<service> = 1 - SMS syntax as defined in GSM-03.40 and GSM-03.41. AT
commands are compatible with GSM 07.05 Phase 2+
Test command
AT+CSMS=?
Reports the supported value of the parameter <service> = 0.
Example
Reference GSM 07.05
SW release
Version A