User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 118 of 202
<cid> - a numeric parameter which specifies a particular PDP context definition
(see +CGDCONT command). If no <cid> is specified, the addresses for all defined
contexts are returned.
<PDP_address> - a string that identifies the terminal in the address space
applicable to the PDP. The address may be static or dynamic. For a static address, it
will be the one set by the +CGDCONT command when the context was defined. For
a dynamic address it will be the one assigned during the last PDP context activation
that used the context definition referred to by <cid>,<PDP_addr> is omitted if
none is available
Test command
AT+CGPADDR=?
Returns a list of defined <cid>s.
Example
AT+CGPADDR=1,2
+CGPADDR = 1,”10.10.15.15”
+CGPADDR = 2,”10.10.20.10”
OK
AT+CGPADDR=?
+CGPADDR: (1-3)
OK
Reference GSM 07.07
SW release
Version A