User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 115 of 202
5.4.7.2 +CGATT - GPRS attach or detach
+ CGATT – GPRS attach or detach
Execute command
AT+CGATT = <state>
The command is used to attach the terminal to, or detach the terminal from, the GPRS
service depending on the parameter <state>.
Parameter:
<state> - indicates the state of GPRS attachment
0 - detached
1 - attached
Read command
AT+CGATT?
Returns the current GPRS service state.
Write command
Test command
AT+CGATT=?
Requests information on the supported GPRS service states.
Example
AT+CGATT?
+CGATT: 0
OK
AT+CGATT=?
+CGATT: (0,1)
OK
AT+CGATT=1
OK
Reference GSM 07.07
SW release Version A