User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 114 of 202
5.4.7 Commands For GPRS
5.4.7.1 +CGACT - PDP context activate or deactivate
+ CGACT – PDP context activate or deactivate
Execute command
Read command
AT+CGACT?
Returns the current activation states for all the defined PDP contexts.
Write command
AT+CGACT = <state>[,
<cid>[, <cid>[,…]]]]
The command is used to activate or deactivate the specified PDP context (s)
Parameters:
<state> - indicates the state of PDP context activation
0 - deactivated
1 - activated
<cid> - a numeric parameter which specifies a particular PDP context definition
(see +CGDCONT command)
Test command
AT+CGACT=?
Reports information on the supported PDP context activation states parameters in the
format: +CGACT: (0,1)
Example
AT+CGACT?
+CGACT: 1,1
OK
AT+CGACT=1,1
OK
Reference GSM 07.07
SW release Version A