User's Manual
Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 113 of 202
5.4.6 Voice Control (TIA IS-101)
5.4.6.1 +VTS: - DTMF tones transmission
+VTS – DTMF tones transmission
Execute command
Read command
Write command
AT+VTS = <DTMF>
Allows the transmission of DTMF tones
Parameter:
<DTMF> - a single ASCII character in the set 0-9, #,*,A-D
Note: this commands operates in voice mode only
Test command AT+VTS=?
Returns +VTS(),(),()
Example
Reference GSM 07.07 / TIA IS-101
SW release Version A