User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 111 of 202
5.4.5 Mobile equipment errors
5.4.5.1 +CMEE - report mobile equipment error
+CMEE – report mobile equipment error
Execute command
Read command
Write command
AT+CMEE = <n>
Enables/disables the report of result code.
+CME ERROR: <err>
as an indication of an error relating to the +Cxxx commands issued. When enabled,
device related errors cause the +CME ERROR: <err> final result code instead of the
default ERROR final result code. ERROR is anyway returned normally when the
error message is related to syntax, invalid parameters, or DTE functionality.
Parameter:
<n> - enable flag
<n> = 0 - disable +CME ERROR:<err> reports, use only ERROR report.
<n> = 1 - enable +CME ERROR:<err> reports, with <err> in numeric format
<n> = 2 - disable +CME ERROR: <err> reports, with <err> in verbose format
Test command
Example
Reference GSM 07.07
SW release
Version A