User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 106 of 202
During the "alarm mode" the device will not make any network scan and will not
register to any network and therefore is not able to dial or receive any call or SMS,
the only commands that can be issued to the TRIZIUM in this state are the #WAKE
and #SHDN, every other command must not be issued during this state.
Test command AT+CALA=?
Reports the supported range of values for the parameters <time>,<n>, <type> and
<text> maximum length
Example
AT+CALA="02/09/07,23:30:00+04"
OK
Reference GSM 07.07
SW release
Version A