User's Manual

Telit TRIZIUM Product Description
80264ST10007a Rev. 4– 09/09/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 101 of 202
5.4.4.6 +CPBR - read phonebook entries
+CPBR – read phonebook entries
Execute command
Read command
Write command
AT+CPBR =
<index>[,<index2>]
returns phonebook entries in locations number from <index1> to <index2> from the
current phonebook memory storage selected with +CPBS. If<index2> is omitted,
only location <index1> is returned.
Parameters: <index>, <index2>
The response format is:
+CPBR: <index>,<number>,<type>,<name>
where
<index> - the current position number of the PB index (to see the range of values
use +CPBR=?)
<number> - the phone number stored in the format <type>
<type> - type of phone number byte in integer format
145 - international numbering scheme (contains the character "+")
129 - national numbering scheme
<name> - the alphanumeric text associated to the number (e.g. name of address)
Note: If all queried locations are empty (but available), no information text lines will
be returned, while if listing fails in an ME error, +CME ERROR: <err> is returned.
Test command AT+CPBR=?
Returns the supported range of values of the parameters in the form
+CPBR: (<minIndex> - <maxIndex>),<nlength>,<tlength>
where
<minIndex> - the minimum index number
<maxIndex>- the maximum index number
<nlength> - maximum number field length
<tlength> - maximum name field length
Note: remember to select the PB storage with +CPBS command before issuing PB
commands.
Example
Reference GSM 07.07
SW release
Version A