Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 T el i t TRIZIUM Product Description DAI Telecom S.p.a.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Contents 1 OVERVIEW.................................................................................................................. 9 2 GENERAL PRODUCT DESCRIPTION ..................................................................... 11 2.1 Dimensions.......................................................................................................................................................11 2.2 Weight .....................
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.13 RTC Bypass out...............................................................................................................................................19 2.14 Vout power output ..........................................................................................................................................19 2.15 Audio levels specifications ................................................................................
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.1.13 5.3.1.14 5.3.1.15 5.3.1.16 5.3.1.17 5.3.1.18 5.3.1.19 5.3.2 5.3.2.1 5.3.2.2 5.3.2.3 5.3.2.4 5.3.2.5 5.3.2.6 5.3.2.7 5.3.2.8 5.3.2.9 5.3.2.10 5.3.2.11 5.3.2.12 5.3.2.13 5.3.2.14 5.3.3 5.3.3.1 5.3.3.2 5.3.3.3 5.3.3.4 5.3.3.5 5.3.3.6 5.3.3.7 5.3.3.8 5.3.3.9 5.3.4 5.3.4.1 5.3.4.2 5.3.5 5.3.5.1 5.3.5.2 5.3.6 5.3.6.1 5.3.6.2 5.3.7 5.3.7.1 5.3.7.2 5.3.7.3 5.3.7.4 5.3.7.5 5.3.7.6 5.3.7.7 5.3.7.8 5.3.7.9 5.3.7.10 5.3.7.11 5.3.7.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.1.1 5.4.1.2 5.4.1.3 5.4.1.4 5.4.1.5 5.4.1.6 5.4.2 5.4.2.1 5.4.2.2 5.4.2.3 5.4.2.4 5.4.2.5 5.4.3 5.4.3.1 5.4.3.2 5.4.3.3 5.4.3.4 5.4.3.5 5.4.3.6 5.4.3.7 5.4.3.8 5.4.3.9 5.4.3.10 5.4.3.11 5.4.3.12 5.4.3.13 5.4.3.14 5.4.3.15 5.4.4 5.4.4.1 5.4.4.2 5.4.4.3 5.4.4.4 5.4.4.5 5.4.4.6 5.4.4.7 5.4.4.8 5.4.4.9 5.4.4.10 5.4.4.11 5.4.4.12 5.4.4.13 5.4.4.14 5.4.4.15 5.4.4.16 5.4.4.17 5.4.5 5.4.5.1 5.4.5.2 5.4.6 5.4.6.1 5.4.7 5.4.7.1 5.4.7.2 5.4.7.3 5.4.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.7.6 +CGREG - GPRS network registration status ....................................................................................119 5.4.7.7 +CGQMIN - quality of service profile (minimum acceptable)...........................................................119 5.4.7.8 +CGQREQ - quality of service profile (requested).............................................................................121 5.4.8 Commands For Battery Charger .........
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.27 #BND – Select Band (DCS 1800 or PCS 1900) ............................................................................160 5.7 FAX Class 1 Commands...............................................................................................................................161 5.7.1 General configuration .............................................................................................................................161 5.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.10 Easy Scan Extension .....................................................................................................................................189 5.10.1 Easy Scan custom AT commands ...........................................................................................................189 5.10.1.1 *CSURV - Network Survey of the complete 900/1800/1900 Network ..........................................189 5.10.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 1 Overview Aim of this document is the description of features, functions and interfaces of the Telit TRIZIUM modules. The Telit TRIZIUM modules are small, lightweight and low power consumption devices that allow digital communication services wherever a GSM 900, DCS 1800, PCS1900 network is present.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 q q a high level specialist technical support to assist you in your development; q free SW releases upgrade download (via the Website) every time a new functionality will be added to the Telit modules SW. For more updated information concerning product Roadmap and availability, technical characteristics, commercial and other issues please check the Telit TRIZIUM modules dedicated Website www.TRIZIUM.com or mail to: ts-trizium@telit.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2 General Product Description 2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Bottom View 2.2 Weight The Telit TRIZIUM module weight is 9 gr. 2.3 Environmental requirements The Telit TRIZIUM module is compliant with the applicable ETSI reference documentation GSM 05.05 Release1999 ETSI EN300910 V8.4.1 2.3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.4 Operating Frequency The operating frequencies in GSM, DCS, PCS modes are conform to the GSM specifications. Mode Freq. TX (MHz) Freq. RX (MHz) Channels (ARFC) TX - RX offset E-GSM-900 890.0 - 914.8 935.0 - 959.8 0 – 124 45 MHz 880.2 - 889.8 925.2 - 934.8 975 - 1023 DCS-1800 1710.2 - 1784.8 1805.2 - 1879.8 512 – 885 95 MHz PCS-1900 1850.2 - 1909.8 1930.2 - 1989.8 512 - 810 80 MHz 2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.7.1 Antenna connector N/A 2.8 Supply voltage The external power supply must be connected to VBATT signal (see paragraph 2.16,) and must fulfil the following requirements: • • Nominal operating voltage Operating voltage range 3.8 V 3.4 V - 4.2 V Note: Operating voltage range must never be exceeded, care must be taken in order to fulfill min/max voltage requirements. 2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.11.2 Sim Reader The Telit TRIZIUM modules support phase 2 GSM11.14 - SIM 3V volts ONLY with and external SIM connector. For 5V SIM operation an external level translator can be added. 2.11.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.11.12 Indication of network service availability By AT commands and LED indication on dedicated output. The STAT_LED is an Open Collector output where it is possible to directly connect a LED to show information on the network service availability and Call status.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 The minimum duration of a DTMF tone is 100 ms. Group high Group low 1209 Hz 1336 Hz 1477 Hz 697 Hz 1 2 3 770 Hz 4 5 6 852 Hz 7 8 9 941 Hz * 0 # 2.11.17 Buzzer output The General Purpose I/O pin GPIO7 can be configured to output the BUZZER output signal, with only an external Mosfet/transistor and a diode a Buzzer can be directly driven.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.12.1 Reset signal Signal Function I/O Pin RESET Phone reset I/O 23 (connector SO301) RESET is used to reset the Telit TRIZIUM module. Whenever this signal is pulled low, the TRIZIUM is reset. When the device is reset it stops any operation and after the release of the reset it shuts down, without doing any detach operation from the network where it is registered to.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.13 RTC Bypass out The PIN VRTC brings out the Real Time Clock supply which is separate from the rest of the digital part, allowing to have only RTC going on when all the other parts of the device are off. To this power output a backup capacitor can be added in order to increase the RTC autonomy during power off of the battery. NO Devices must be powered from this pin. 2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.15 Audio levels specifications The audio of the Telit TRIZIUM module is organized into two main paths: - internal path (called also MT) - external path (called also HF) These two paths are meant respectively for handset and headset/handsfree use.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.16 Interfaces on TRIZIUM TRIZIUM PIN-OUT Pin Signal I/O Function 1 I/O Port D5 / GPIO13 (4) CMOS 2.8V I/O Port D4 / GPIO12 (4) CMOS 2.8V I/O Port D3 / GPIO11 (4) CMOS 2.8V I/O Port D2 / GPIO10 (4) CMOS 2.8V I/O Port D1 / GPIO9 (4) CMOS 2.8V I/O Port D0 / GPIO8 (4) CMOS 2.8V 7 PD5 GPIO13 PD4 GPIO12 PD3 GPIO11 PD2 GPIO10 PD1 GPIO9 PD0 GPIO8 MON1_CAM I/O Camera clock (4) CMOS 2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 30 AXE I Handsfree switching 31 VOUT - Power output for external accessories (camera) - 32 IICSDA GPIO4 I/O CMOS 2.8V 33 IICSCL GPIO2 I/O 34 GPIO1 I/O Camera IIC interface / GPIO4 Configurable general purpose I/O pin (4) Camera IIC interface / GPIO2 Configurable general purpose I/O pin (4) GPIO1 Configurable general purpose I/O pin CMOS 2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.17 Mounting the R T IZIUM on your Board 2.17.1 General Trizium module has been designed in order to be compliant with a standard smt process, with the following details. 2.17.2 Module finishing & dimensions All quotes are in mm, general tolerance ± 0.1 Surface finishing Ni/Au for all test pads (in white on the drawing). Surface finishing Sn63/Pb37 for all solder pads (in black on the drawing).
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.17.3 Recommended foot print for application 2.17.4 Stencil Stencil’s apertures layout can be the same of the recommended footprint (1:1), we suggest a thickness of stencil foil = 120µm.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.17.5 Solder reflow The following is the recommended solder reflow profile Temperature (ºC) 300 200 100 0 0 100 200 300 Time (sec) NOTE : This is an ideal profile, and actual conditions obtained in any specific reflow oven will vary. This profile is based on convection or RF plus forced convection heating.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.17.6 Packing system 170 ± 0,3 According to smt processes for pick & place mouvement requirements, Trizium modules are packaged on trays, each tray contains 20 pieces. Tray dimensions are:: 320 ± 0,3 Section A-A All quotes are in mm, general tolerance ± 0.1 6.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Note that trays can withstand a maximum temperature of 65° C. Modules orientation on tray: Ref.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 2.17.7 Moisture sensibility The level of moisture sensibility of Trizium module is “3”, in according with standard IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of components.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 3 Evaluation Kit In order to assist you in the development of your Telit TRIZIUM module based application, Telit can supply an Evaluation Kit (same as used for the GM862 family, with a dedicated adaptor) with appropriate power supply, SIM card housing, RS 232 serial port level translator, direct UART connection, Handset, Headset and Hands-free (car kit) audio, antenna.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 3.1 Evaluation Kit description For a detailed description of the Telit Evaluation Kit refer to the documentation provided with the Telit TRIZIUM Hardware User Guide. The Telit Evaluation Kit can be divided into different blocks depending on the function they implement.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Both these interfaces are supported. 3.1.3 Audio The Evaluation Kit board provides two software/hardware selectable audio paths, the internal and the external one. All the handset, headset and hands free-car kit functions are supported. Furthermore for each audio path two solution are presented: single ended and balanced. 3.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 4 Service and firmware update The serial cable used for the communication with a PC can be also used to update the Telit TRIZIUM module firmware. The RS232 connector DB type 9 pin 90° is used to connect the Telit Evaluation Kit. to any DTE . All levels are conformed to RS232 and V.24 standard and a PC serial port can be directly connected to this connector.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5 AT Command The Telit TRIZIUM module can be driven via the serial interface using the standard AT commands1. The Telit TRIZIUM module is compliant with: 1. Hayes standard AT command set, in order to maintain the compatibility with existing SW programs. 2. ETSI GSM 07.07 specific AT command and GPRS specific commands. 3. ETSI GSM 07.05 specific AT commands for SMS (Short Message Service) and CBS (Cell Broadcast Service) 4.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 • +CMD1=? This is a test command for checking possible subparameter values These commands might be performed in a single command line as shown below: ATCMD1 CMD2=10+CMD1;+CMD2=, ,10;+CMD1?;+CMD1=? anyway it is always preferable to separate into different command lines the basic commands (i.e.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.2.
Telit TRIZIUM Product Description 80264ST10007a Rev.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 #SRS #SRP #STM #PCT #SHDN #QTEMP #SGPO #GGPI #MONI +CGACT +CGATT +CGDATA +CGDCONT +CGPADDR +CGQMIN +CGQREQ 10 10 10 10 10 10 10 10 10 180 180 20 20 20 20 20 5.2.4 Command issuing timing The chain Command -> Response shall always be respected and a new command must not be issued before the TRIZIUM has terminated all the sending of its response result code (whatever it may be).
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3 Hayes Compliant AT Commands 5.3.1 Generic Modem Control 5.3.1.1 &F - restore factory configuration &F – restore factory configuration Execute command AT&F Calls the factory configuration, resetting the default profile. Read command Write command Test command Example Reference SW release V25ter. Version A 5.3.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.1.3 +FCLASS - select active service class +FCLASS - select active service class Execute command Read command Returns the current configuration value of the parameter . AT+FCLASS? Write command Set the TRIZIUM in specified connection mode (data, fax, voice), hence all the calls done AT+FCLASS= after, will be data or voice.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.1.6 &Z - store telephone number in the Telit TRIZIUM module internal phonebook &Z – store telephone number in the TRIZIUM internal phonebook Execute command The TRIZIUM has a built in non volatile memory in which telephone numbers of a AT&Z = maximum 24 digits can be stored. The command AT&Z = stores in the record n the telephone number nr. The records cannot be overwritten, they must be cleared before rewriting.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.1.7 &N - display internal phonebook stored numbers &N – display internal phonebook stored numbers Execute command Returns the telephone number stored in the internal memory at the record number . AT&N Parameter: - phonebook record Note: if parameter is omitted then all the internal records are shown. Read command Write command Test command Example Reference SW release Version A 5.3.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Read command Write command Test command Example Reference SW release 5.3.1.12 V.25ter Version A +GSN - request serial number +GSN – request serial number Execute command Returns the device board serial number. AT+GSN Note: The number returned is not the IMSI, it is only the board number Read command Write command Test command Example Reference SW release V.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.1.13 &V - display current configuration & profile &V – display current configuration & profile Execute command Returns all the configuration parameters settings.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 REG DEC HEX where - S register number (0 ..
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.1.16 &V2 - display last connection statistics &V2 – display last connection statistics Execute command Returns the last connection statistics & connection failure reason. AT&V2 Read command Write command Test command Example Reference SW release 5.3.1.17 Version A \V - single line connect message \V – Single line connect message Execute command Set single line connect message. AT\V Parameter: = 0 - off = 1 on Read comman
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.1.18 %L - report line signal level %L – report line signal level Execute command Reports the line signal level. AT%L Note: Since on mobile phone there's no line connection, command is included only for compatibility and returns only OK. To check signal strength (level) use the +CSQ command. Read command Write command Test command Example Reference SW release 5.3.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.2 DTE - modem interface control 5.3.2.1 E - command echo E – command echo Execute command Read command Write command ATE Test command Example Reference SW release Controls the command echo response of the device, enabling or disabling the echo. Parameter: = 0 - disables command echo, hence after this command the only characters received by DTE are the responses to commands sent to device.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.2.3 V- result code form V – result code form Execute command Read command Write command ATV Test command Example Reference SW release Sets the result code format. Parameter: = 0 set the short format (terse) return codes are numbers 0-9. = 1 set the long form (verbose) return codes. Note: Line feed is not issued before a short format result code. V25ter Version A 5.3.2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.2.5 I - Request identifier and software checksum I – request identifier and software checksum Execute command Read command Write command ATI Test command Example Reference SW release Returns the identifier and a software checksum. Parameter: = 0 numerical identifier. = 1 TRIZIUM checksum = 2 checksum check result = 3 manufacturer, software product code = 4 product name = 5 DOB version V25ter Version A 5.3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.2.7 &D - data terminal ready (DTR) control &D – data terminal ready (DTR) control Execute command Read command Write command AT&D Test command Example Reference SW release Controls the TRIZIUM behaviour to the RS232 DTR transitions. Parameter: = 0 DTR transitions are ignored. = 1 when the TRIZIUM is connected, the high to low transition of DTR pin sets the device in command mode, the current connection is NOT closed.
Telit TRIZIUM Product Description 80264ST10007a Rev.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.2.10 \R - ring (RI) control \R – ring (RI) control Execute command Read command Write command AT\R controls the RING output pin behaviour. Parameter: = 0 - RING on during ringing and further connection = 1 – RING on during ringing = 2 - RING follows the ring signal Note: to check the ring option status use the &V command. Test command Example Reference SW release 5.3.2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Test command AT+IFC=? Example Reference SW release = 2 - C105 (RTS) = 3 - XON/XOFF not filtered = 0 - flow control None = 1 - XON/XOFF = 2 - C106 (CTS) Note: This command is equivalent to &K command. Response Returns all supported values of the parameters and .
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.2.13 +ILRR - DTE - modem rate reporting +ILRR – DTE-modem rate reporting Execute command Read command AT+ILRR? Write command AT+ILRR = Test command AT+ILRR=? Example Reference SW release Returns active setting of port speed rate reporting information. Controls whether or not the +ILRR: information text is transmitted from the TRIZIUM to the DTE.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.2.14 +ICF - DTE - modem character format +ICF – DTE-modem character format Execute command Read command AT+ICF? Write command AT+ICF = [,] Test command AT+ICF=? Example Reference SW release Returns current value of the character format. Defines the asynchronous character format to be used when autobauding is disabled. Parameter: = 0..
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.3 Call Control 5.3.3.1 D - dial D – dial Execute command ATD ATD ; Starts a call to the phone number given as parameter. Parameter: - phone number to be dialled Note: The call is a data call or voice call depending on +FCLASS setting. If AT+FCLASS=8 command was issued before calling then the call will be done as a voice call, instead if AT+FCLASS=0 command was issued the call will be a data one.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 D – dial Other values are reserved and will result in an ERROR response to the set command. : a digit string which specifies a particular PDP context definition (see +CGDCONT command). Read command Write command Test command Example Reference SW release V25ter.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.3.2 T - set tone dial T – set tone dial Execute command ATT It has no effect is included only for backward compatibility with landline modems. Read command Write command Test command Example Reference SW release V25ter. Version A 5.3.3.3 P - set pulse dial P – set pulse dial Execute command ATP It has no effect is included only for backward compatibility with landline modems.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 SW release Version A 5.3.3.6 H - disconnect H - disconnect Execute command ATH It is used to close the current conversation (voice, data or fax). Note: When a data conversation is active the device is in on-line mode commands are not sensed, instead characters are sent to the other interlocutor.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.3.7 O - return to On Line Mode O – return to on line mode Execute command ATO It is used return to On-line mode from command mode. If there's no connection active returns ERROR. Note: After the issue of this command, if the device is in conversation, to send other commands to the device you must return to command mode by issuing the escape sequence or lowering DTR if &D1 option is active.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.3.9 &P - pulse dial make/break ratio &P – pulse dial make/break ratio Execute command AT&P It is has no effect is included only for backward compatibility with landline modems.. Read command Write command Test command Example Reference SW release Version A 5.3.4 Modulation control 5.3.4.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.4.2 %E - enable/disable line quality monitor and auto retrain or fallback / fallforward %E – enable/disable line quality monitor and auto retrain or fallback/fallforward Execute command It has no effect is included only for backward compatibility with AT%E landline modems.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.5 Compression control 5.3.5.1 +DS - set data compression +DS – set data compression Execute command Read command AT+DS? Returns current value of the data compression parameter. Write command AT+DS = Sets the V42 compression parameter.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.6Break control 5.3.6.1 \B - transmit break to remote \B – transmit break to remote Execute command Read command Write command AT\B Test command Example Reference SW release It has no effect is included only for backward compatibility with landline modems Version A 5.3.6.2 \K - break handling \K – break handling Execute command Read command Write command AT\K Test command Example Reference SW release Response It has no effect is in
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.7 S parameters 5.3.7.1 S0 - number of rings to auto answer S0 – number of rings to auto answer Execute command Read command ATS0? Write command ATS0 = Test command Example Reference SW release Returns the current value of S0 parameter. Sets the number of rings required before device automatically answers an incoming call. Parameter: = 0-255 = 0 auto answer disabled V25ter Version A 5.3.7.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.7.3 S2 - escape character S2 – escape character Execute command Read command Write command ATS2 = Test command Example Reference SW release S2 holds the decimal value of the ASCII character used as escape character. This command sets this character equal to . Parameter: - escape character 0-255 Note: The escape sequence consists of three escape characters preceded by n ms of idle and followed by m ms of idle.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.7.5 S4 - line feed character S4 – line feed character Execute command Read command Write command ATS4 = Test command Example Reference SW release Sets the character recognized as line feed character. Parameter: - line feed character 0-127 Note: Default 10 (Line Feed). The line feed character is output after carriage return character if verbose result codes are used ( V1 option used ). V25ter Version A 5.3.7.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.7.7 S7 - wait time for carrier, silence or dial tone S7 – wait time for carrier, silence or dial tone Execute command Read command Write command S7 sets the length of time in seconds that the device will wait for carrier before ATS7 = hanging up the call. The timer is started when the device finishes dialing (originate), or 2 seconds after going off-hook.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.7.9 S12 - escape prompt delay S12 – escape prompt delay Execute command Read command Write command ATS12 =
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.3.7.11 S30 - disconnect inactivity timer S30 –disconnect inactivity timer Execute command Read command Write command ATS30 = Defines the inactivity timeout timer value in minutes. The Device disconnects if no characters are exchanged for a time period of at least S30 minutes. Parameter: - 0-127 minutes = 0 - means inactivity timer disabled, hence no disconnect on inactivity feature is enabled.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4 ETSI GSM 07.07 AT Commands 5.4.1General 5.4.1.1 +CGMI - request manufacturer identification +CGMI – request manufacturer identification Execute command Returns the device manufacturer identification code. AT+CGMI Read command Write command Test command Example Reference GSM 07.07 SW release Version A 5.4.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Execute command Read command AT+CSCS? Write command AT+CSCS Test command AT+CSCS=? Example Reference SW release Returns the current value of the active character set. Sets the current character set used by the device. Parameter: = "IRA" - char set Note: The only character set supported yet is the ITU–T.50 ( IRA) Returns the supported values of the parameter chset. Yet only IRA is supported. GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.1.6 +CIMI - request international mobile subscriber identity (IMSI) +CIMI – request international mobile subscriber identify (IMSI) Execute command Returns the value of the Internal Mobile Subscriber Identity stored in the AT+CIMI SIM. Note: A SIM card must be present in the SIM card housing, else the command returns ERROR. Read command Write command Test command Example Reference GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.2 Call control 5.4.2.1 +CBST - select bearer service type +CBST – select bearer service type Execute command Read command Returns current value of the parameters , and AT+CBST? Write command AT+CBST = , Selects the bearer service with data rate , and the connection element , to be used when data calls are originated.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.2.2 +CRLP - radio link protocol +CRLP – radio link protocol Execute command Read command Returns the current value of the RLP protocol parameters. AT+CRLP? Write command AT+CRLP = , , Radio link protocol (RLP) parameters used when non-transparent data calls are originated may be altered with this command. , , Parameters: = 1...61 - IWF window Dimension = 1...
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.2.3 +CR - service reporting control +CR – service reporting control Execute command Read command Returns current intermediate report setting AT+CR? Write command Controls whether or not intermediate result code +CR: is returned from the TA AT+CR = to the TE.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.2.4 +CEER - extended error report +CEER – extended error report Execute command Reports a information text regarding some error condition that may occur: - the failure in the last unsuccessful call setup (originating or answering) AT+CEER - the last call release - the last unsuccessful GPRS attach or unsuccessful PDP context activation, - the last GPRS detach or PDP context deactivation.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.2.5 +CRC - cellular result codes +CRC – cellular result codes Execute command Read command Returns current value of the parameter . AT+CRC? Write command Controls whether or not the extended format of incoming call indication is used. When AT+CRC = enabled, an incoming call is indicated to the TE with unsolicited result code +CRING: instead of the normal RING.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3Network service handling 5.4.3.1 +CNUM - subscriber number +CNUM – subscriber number Execute command Returns the subscriber number i.e. the phone number of the device that is stored in the SIM AT+CNUM card.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.2 +CREG - network registration report +CREG – network registration report Execute command Read command Write command AT+CREG = Enables/disables network registration reports depending on the parameter mode.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 +CREG – network registration report at+creg? +CREG: 0,2 OK at+creg? +CREG: 0,1 (the TRIZIUM is registered ) OK at+creg? +CREG: 0,1 OK Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.3 +COPS - operator selection +COPS – operator selection Execute command Read command AT+COPS? Write command AT+COPS = [[,[,]]] Returns current value of , and Forces an attempt to register the GSM network operator, parameter defines whether the operator selection is done automatically or it is forced with parameter.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.4 +CLCK - facility lock/ unlock +CLCK – facility lock/unlock Execute command AT+CLCK = , [, [,]] Read command AT+CLCK=,2 It is used to lock or unlock a ME o a network facility.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Example Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.6 +CLIP - calling line identification presentation +CLIP – calling line identification presentation Execute command Read command AT+CLIP? Returns the status of the supplementary service CLI in the format: +CLIP: , where: = 0 - CLI presentation disabled = 1 - CLI presentation enabled : status if the CLIP service on the GSM network = 0 - CLIP not provisioned = 1 - CLIP provisioned = 2 - unknown (e.g.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.8 +CCFC - call forwarding number and conditions +CCFC – call forwarding number and condition Execute command AT+CCFC = Controls the call forwarding supplementary service. Registration, erasure, activation, , deactivation, and status query are supported.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 +CCFC – call forwarding number and condition Note: When querying the status of a network service (=2) the response line for 'not active' case (=0) should be returned only if service is not active for any . Write command Test command AT+CCFC=? Example Reference SW release Reports supported values for the parameter . GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.9 +CCWA - call waiting +CCWA – call waiting Execute command AT+CCWA = [[,[,]]] Controls the call waiting indication supplementary service. Activation, deactivation, and status query are supported.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Parameter: = 0 Releases all pending calls = 1 Releases all active calls (if present), and accepts or reconnects the pending or waiting call = 2 Suspends (into pending status) the active call and accepts or reconnects the waiting or pending call. = 3 NOT SUPPORTED Note: ONLY for VOICE calls Read command Write command Test command Example Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.11 +CUSD - unstructured supplementary service data +CUSD – unstructured supplementary service data Execute command AT+CUSD = ,[] Enables /disables the unstructured service data reporting. Parameters: : is used to disable/enable the presentation of an unsolicited result code: +CUSD: [,,] to the TE.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.12 +CAOC - advice of charge +CAOC – advice of charge Execute command AT+CAOC = Controls the advise of charge service; the command also includes the possibility to enable an unsolicited event reporting of the CCM information. If unsolicited reporting is enabled DTE sends the result code +CCCM: when the CCM value changes, but not more than every 10 seconds.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Test command Example Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4 Mobile Equipment control 5.4.4.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Note: The phone functionality remains always FULL. Write command AT+CFUN= Enables/disables the power saving function. If enabled it reduces the power consumption during the idle time, thus allowing a longer standby time with a given battery capacity.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.4 +CSQ- signal quality +CSQ – signal quality Execute command AT+CSQ Reports received signal quality indicators in the form +CSQ:, where - received signal strength indication 0 - 113 dBm or less 1 - 111 dBm 2...30 - 109dBm ... -53 dBm / 2 dBm per step 31 - 51 dBm or greater 99 - not known or not detectable - bit error rate % 0 - less than 0.2 % 1 - 0.2% a 0.4% 2 - 0.4% a 0.8% 3 - 0.8% a 1.6% 4 - 1.6% a 3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.5 +CPBS - select phonebook memory storage +CPBS – select phonebook memory storage Execute command Read command Write command AT+CPBS = Selects phonebook memory storage , which will be used by other phonebook commands.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.6 +CPBR - read phonebook entries +CPBR – read phonebook entries Execute command Read command Write command returns phonebook entries in locations number from to from the AT+CPBR = current phonebook memory storage selected with +CPBS. If is omitted, [,] only location is returned.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.7 +CPBF - find phonebook entries +CPBF – find phonebook entries Execute command Read command Write command AT+CPBF = Issues a search for the phonebook records that have the text sub-string at the start of the name field and returns a report in the form +CPBF: ,,, where index, number, type and name have the same meaning than in the command +CPBR report.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.10 +CALA - Alarm Management +CALA – Alarm Management Execute command Read command AT+CALA? Write command AT+CALA = [
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 During the "alarm mode" the device will not make any network scan and will not register to any network and therefore is not able to dial or receive any call or SMS, the only commands that can be issued to the TRIZIUM in this state are the #WAKE and #SHDN, every other command must not be issued during this state.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.11 +CALM - alert sound mode +CALM – alert sound mode Execute command Read command Write command AT+CALM = It is used to select the general alert sound mode of the device. Parameter: = 0 - normal mode = 1 - silent mode (no sound will be generated by the device) Note: if silent mode (1) is selected then incoming calls will not produce alerting sounds but only the message RING or +CRING.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.4.15 +CACM - accumulated call meter +CACM – accumulated call meter Execute command Read command Reports the current value of the SIM ACM in the format AT+CACM? +CACM: Note: the value is in units whose price and currency is defined with command +CPUC Write command Resets the SIM Accumulated Call Meter (ACM). Internal memory CCM remains AT+CACM = unchanged.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 - SIM PIN2 Note: SIM PIN2 is required to set the values. Test command Example Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.5 Mobile equipment errors 5.4.5.1 +CMEE - report mobile equipment error +CMEE – report mobile equipment error Execute command Read command Write command Enables/disables the report of result code. AT+CMEE = +CME ERROR: as an indication of an error relating to the +Cxxx commands issued. When enabled, device related errors cause the +CME ERROR: final result code instead of the default ERROR final result code.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.5.2 +CME ERROR: - ME error result code This is NOT a command, it is the error response to +Cxxx GSM 07.07 commands. Syntax: AT+CME ERROR: Parameter: - error code can be either numeric or verbose.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.6 Voice Control (TIA IS-101) 5.4.6.1 +VTS: - DTMF tones transmission +VTS – DTMF tones transmission Execute command Read command Write command Allows the transmission of DTMF tones AT+VTS = Parameter: - a single ASCII character in the set 0-9, #,*,A-D Note: this commands operates in voice mode only Test command AT+VTS=? Returns +VTS(),(),() Example Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.7 Commands For GPRS 5.4.7.1 +CGACT - PDP context activate or deactivate + CGACT – PDP context activate or deactivate Execute command Read command Returns the current activation states for all the defined PDP contexts.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.7.2 +CGATT - GPRS attach or detach + CGATT – GPRS attach or detach Execute command The command is used to attach the terminal to, or detach the terminal from, the GPRS service depending on the parameter . AT+CGATT = Parameter: - indicates the state of GPRS attachment 0 - detached 1 - attached Read command Returns the current GPRS service state.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.7.3 +CGDATA - Enter data state + CGDATA – Enter data state Execute command The command causes to perform whatever actions are necessary to establish communication with the network using one or more GPRS PDP types.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.7.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Test command AT+CGPADDR=? Example Reference SW release - a numeric parameter which specifies a particular PDP context definition (see +CGDCONT command). If no is specified, the addresses for all defined contexts are returned. - a string that identifies the terminal in the address space applicable to the PDP. The address may be static or dynamic.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.7.6 +CGREG - GPRS network registration status + CGREG – GPRS network registration status Execute command Read command Returns the status of result code presentation mode and the integer which shows whether the network has currently indicated the registration of the terminal in AT+CGREG? the format: +CGREG:,.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 - mean throughput class Test command AT+CGQMIN=? Example Reference SW release If a value is omitted for a particular class then this class is not checked. Returns values supported as a compound value. AT+CGQMIN=1,0,0,3,0,0 OK AT+CGQMIN? +CGQMIN: 1,0,0,5,0,0 OK AT+CGQMIN=? +CGQMIN: (0-3),(0-3),(0-5),(0-9),(0-19,31) OK GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.7.8 +CGQREQ - quality of service profile (requested) + CGQREQ – quality of service profile (requested) Execute command Read command Returns the current settings for each defined context in the format: AT+CGQREQ? +CGQREQ: ,,,,, The command allows to specify a Quality of Service Profile that is used when the Write command terminal sends an Activate PDP Context Request message to the network.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.4.8 Commands For Battery Charger 5.4.8.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5 ETSI GSM 07.05 AT Commands for SMS and CB services 5.5.1 General configuration 5.5.1.1 +CSMS - select message service +CSMS – select message service Execute command Read command Reports the value of the current parameters in the format: AT+CSMS? +CSMS: ,,, where: - message syntax 0 - SMS syntax as defined in GSM-03.40 and GSM-03.41. AT commands are compatible with GSM 07.05 Phase 2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.1.2 +CPMS - preferred message storage +CPMS – preferred message storage Execute command Read command Reports the message storage status in the format: AT+CPMS? +CPMS:,,,,,,,, where , and are the selected storage memories for reading, writing and storing respectively.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.1.3 +CMGF - message format +CMGF –message format Execute command Read command AT+CMGF? Write command AT+CMGF = Test command AT+CMGF=? Example Reference SW release Reports the current value of the parameter = 0. Selects the SMS format to be used in reading and writing messages. Parameter: = 0 - PDU as defined in GSM 3.40 and GSM 3.41 = 1 - text Reports the supported value of parameter. GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 +CMT, +CMGL, +CMGR commands are utilised Test command AT+CSDH=? Example Reference SW release Reports the supported range of values for the parameter GSM 07.05 Version A 5.5.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.1.8 +CSCB – Select Cell Broadcast Message types +CSCB –select Cell Broadcast Message types Execute command Read command AT+CSCB? Write command AT+CSCB= [,[,]] Reports the current value of the parameters , and in the format: +CSCB: ,, Selects the Cell Broadcast message types to be received by the device.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.1.9 +CMS ERROR - message service failure result code This is NOT a command, it is the error response to +Cxxx GSM 07.05 commands Syntax: AT+CMS ERROR: Parameter: - error code can be either numeric or verbose. values: Numeric Format Verbose Format 0...127 GSM 04.11 Annex E-2 values 128...255 GSM 03.40 sub clause 9.2.3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.2 Message configuration 5.5.2.1 +CSCA - service center address +CSCA –service center address Execute command Read command AT+CSCA? Reports the current value of the default SCA in the format: +CSCA: , Note: if SCA is not present the device reports an error message. Write command AT+CSCA=, Sets the Service center Address to be used for mobile originated SMS transmissions.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.3 Message receiving and reading 5.5.3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 +CNMI – new message indications to terminal equipment Class 2 messages and messages in the message waiting indication group (stored message) result in indication as defined in = 1. 3 - Class 3 SMS-DELIVERs are reported directly to TE using unsolicited result codes defined in = 2. Messages of other data coding schemes result in indication as defined in = 1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 +CNMI – new message indications to terminal equipment Test command Reports the supported range of values for the +CNMI command parameters. AT+CNMI=? Reference GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.3.2 +CMGL - list messages +CMGL – list messages Execute command Read command Write command AT+CMGL = Reports the list of all the messages stored into (see command +CPMS ) memory storage having the status equal to parameter.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 +CMGL – list messages Test command Example Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.3.3 +CMGR - read message +CMGR – read message Execute command AT+CMGR = Reports the message with location value from preferred message storage (see +CPMS) in the format: (PDU Mode) +CMGR: , where - status of the message 0 - new message 1 - read message 2 - stored message not yet sent 3 - store message already sent - length of the PDU in bytes.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 error message will be returned. Read command Write command Test command Example Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.4 Message sending and writing 5.5.4.1 +CMGS - send message +CMGS – send message Execute command (PDU Mode) AT+CMGS = (Text Mode) AT+CMGS= (PDU Mode) Sends to the network a SMS message input as a PDU. Parameter: = 8…176 - represents the length of the PDU to be sent in bytes. The device responds to the command with the prompt '>' and awaits for the number of bytes of PDU specified.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 +CMSS: where is the message reference number. If message sending fails for some reason, an error code is reported: +CMS ERROR: Note: to store a message in the storage see command +CMGW. Care must be taken to ensure that during the command execution, which might take several seconds, no other SIM interacting commands are issued.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.5.4.3 +CMGW - write message to memory +CMGW – write message to memory Execute command (PDU Mode) (PDU Mode) Writes in the memory storage a new SMS message input as a PDU. AT+CMGW = Parameter: - represents the length of the PDU to be written in bytes. The device responds to the command with the prompt '>' and awaits for the number of bytes of PDU specified.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 3 - delete all received read and all written sent/unsent messages 4 - delete all messages. Read command Write command Test command Example Reference SW release GSM 07.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6 Custom AT Commands 5.6.1 General configuration 5.6.1.1 #CGMI - request manufacturer identification #CGMI – request manufacturer identification Execute command Returns the device manufacturer identification code with command echo. AT#CGMI Read command Write command Test command Example Reference Telit TRIZIUM AT Command Specification SW release Version A 5.6.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.5 #CIMI - request international mobile subscriber identity (IMSI) #CGSN – request international mobile subscriber identity (IMSI) Execute command Returns the international mobile subscriber identity, identified as the IMSI number, with command echo. AT#CIMI Read command Write command Test command Example Reference Telit TRIZIUM AT Command Specification SW release Version A 5.6.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.7 #SRS - Select ringer sound #SRS – select ringer sound Execute command AT#SRS = [,] Set the ringer sound. The parameters are: - ringing tone 0 - current ringing tone 1 .. 12 - ringing tone number ringing tone playing timeout in seconds. 0 - no ringing tone playing, only tone setting 1 .. 60 - tone playing for seconds and successive tone setting.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.8 #SRP –Select Ringer Path #SRP – select ringer path Execute command AT#SRP= Selects the audio path towards whom sending ringer sounds and all signaling tones.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.9 #STM - Signalling Tones Mode #STM – signalling tones mode Execute command Read command AT#STM? Reports the current signaling tones status in the format:#STM: Write command AT#STM = Test command AT#STM=? Example Reference SW release 5.6.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.11 #SHDN – Software Shut Down #SHDN – software shutdown Execute command AT#SHDN After the issuing of this command device detaches from the network and shuts down. Before definitive shut down an OK response is returned. Note: after the issuing of this command any previous activity is terminated and the device will not respond to any further command. To turn it on again Hardware pin ON/OFF must be tied low.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.12 #WAKE – Wake from Alarm mode #WAKE – Wake from Alarm Mode Execute command After the issuing of this command device exits the "Alarm mode" and enters the AT#WAKE=0 normal operating mode. After entering in normal operating mode an OK response is returned. With the execution of is command all Alarm activity (for example alarm tone playing ) is immediately terminated.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.13 #QTEMP –Query Temperature overflow #QTEMP – query temperature overflow Execute command Read command Queries the internal temperature sensor of the device for over temperature. The result AT#QTEMP? is reported in the format: #QTEMP: where - over temperature indicator = 0 - device temperature is in the working range = 1- device temperature is out of the working range, may be too high or too low.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.14 #SGPO –Set General Purpose Output #SGPO – set general purpose output Execute command Read command Reports the #SGPO command setting, hence the opposite status of the open collector AT#SGPO? pin in the format: #SGPO: .
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.15 #GGPI – Read General Purpose Input #GGPI – read general purpose input Execute command Read command Reports the read value for the input pin GPIO1in the format: AT#GGPI? #GGPI:
, where direction setting (see #GGPI= ) - logic value read from pin GPIO1 Note: Since the reading is done after the insulating transistor, the reported value is the opposite of the logic status of the GPIO1 input pin.Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Reports the supported range of values of the command parameters ,,.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.17 #ADC – Read Analog/Digital Converter input #ADC – Read Analog/Digital Converter input Execute command Read command Reports the read value on the input pin ADC after Analog to Digital conversion in AT#ADC? the format: #ADC: where - the Digital number representing the analog value of the voltage on the ADC_IN pin. Note: The command returns the last valid measure.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 AT#QSS = Test command AT#QSS=? Example Reference SW release Set the type of notification. If enabled (mode = 1) at any status change is send: #USS: Parameter: Returns the supported range of values of the parameter .
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.20 #ACAL – Set Automatic Call #ACAL – set automatic call Execute command Read command AT#ACAL? Returns the current status in the format: #ACAL: Write command AT#ACAL = Enable the automatic call. Parameter: = 0 – disable = 1 – enable If enabled, the transition OFF/ON of DTR causes an automatic data call to the number stored in position number 1 of the phone book. The &D command must be set to 2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.21 #SMOV – SMS Overflow #SMOV – SMS overflow Execute command Read command AT#SMOV? Write command AT#SMOV= Return the current status in the format: #SMOV: . Enable the signalling of SMS overflow Parameter: = 0 - disable = 1 - enable If enable, when the maximum storage capacity has came, the #USMO: network initiated notification is send. Test command AT#SMOV=? Example Reference SW release 5.6.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 1 - enabled - handsfree mode 2…255 reserved Note: This setting returns to default after power off. Test command AT#SHFSD=? Example Reference SW release 5.6.1.26 Returns the supported range of values of the parameter . Telit TRIZIUM AT Command Specification Version A #/ – Repeat last command #/ – Repeat last command Execute command AT#/ Read command It is used to execute again the last received command.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.6.1.27 #BND – Select Band (DCS 1800 or PCS 1900) #BND – Select Band (DCS1800 or PCS1900) Execute command Read command Return the current band selected in the format: AT#BND? #BND: Write command AT#BND = Set the band parameter to the Band value. Parameter : 0 - DCS 1800MHz 1 - PCS 1900MHz Note: This setting is maintained even after power off.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.7 FAX Class 1 Commands 5.7.1 General configuration 5.7.1.1 +FCLASS - select active service class +FCLASS - select active service class Execute command Read command Returns the current configuration value of the parameter . AT+FCLASS? Write command Set the TRIZIUM in specified connection mode (data, fax, voice), hence all the calls done AT+FCLASS= after, will be data or voice.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.7.1.2 +FMI – Report manufacturer ID +FMI – Report manufacturer ID Execute command Read command AT+FMI? Reports the manufacturer ID Write command Test command Example AT+FMI? Telit Mobile Terminals OK Reference ITU T.31 and TIA/EIA-578-A specifications SW release Version A 5.7.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.7.1.4 +FMR – Report revision ID +FMR – Report revision ID Execute command Read command AT+FMR? Write command Test command Example Reports the software revision ID AT+FMR? 1.01.000 CS988 OK Reference ITU T.31 and TIA/EIA-578-A specifications SW release Version A 5.7.2 Transmission/Reception control 5.7.2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.7.2.2 +FRS – Wait for receive silence +FRS – Wait for receive silence Execute command Read command Write command AT+FRS=
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Test command AT+FRM=? Example Reference SW release Returns all supported values of the parameters . ITU T.31 and TIA/EIA-578-A specifications Version A 5.7.2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.7.2.6 +FRH – Receive data with HDLC framing +FRH – Receive data data with HDLC framing Execute command Read command Write command AT+FRH= Test command AT+FRH=? Example Reference SW release this command causes the module to receive facsimile data using HDLC protocol and the modulation defined by the parameter . parameter : carrier modulation 3 - V21/300 bps Returns all supported values of the parameters . ITU T.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Test command AT+FPR=? Example Reference SW release Returns all supported values of the parameters . ITU T.31 and TIA/EIA-578-A specifications Version A 5.7.3.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.8 Easy GPRS Extension 5.8.1 Overview The Easy GPRS feature applies only to the Telit TRIZIUM and allows a Telit TRIZIUM user to contact a device in internet and establish with it a raw data flow over the GPRS and Internet networks.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 - In data traffic mode (Socket Mode, SKTM), the client can send/receive a raw data stream which will be encapsulated in the previously configured TCP / IP packets which will be sent to the other side of the network and viceversa. Control plane of ongoing socket connection is deployed internally to the module. 5.8.2.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 The implementation of the EASY GPRS feature has the following known limitations: - Only one socket can be opened at a time, no multiple socket connections can be made; Only the first GPRS context is associated with this feature; The closing of a socket implies always the deactivation of the GPRS context associated; It is taken for granted that external processor will be able to handle at least a limited v.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.8.4.2 #PASSW – Authentication Password control #PASSW – Authentication Password control Execute command Read command AT#PASSW=? Reports the maximum password length. Write command AT#PASSW="" Test command Example This command sets the user password string to be used during the authentication step to be the string . Parameter: - authentication password - any string value up to max length reported in the Test command.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.8.4.3 #PKTSZ –Packet Size control #PKTSZ –Packet Size control Execute command Read command AT#PKTSZ? Write command AT#PKTSZ= Test command AT#PKTSZ=? Example Reports the current value of the parameter . This command sets the default packet size to be used by the TCP/UDP/IP stack for data sending.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.8.4.4 #DSTO – Data Sending Timeout control #DSTO –Data Sending Timeout control Execute command Read command AT#DSTO? Reports the current value of the parameter
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.8.4.5 #SKTTO – Socket inactivity timeout control #SKTTO – Socket inactivity timeout control Execute command Read command AT#SKTTO? Reports the current value of the parameter
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.8.4.6 #SKTSET – Socket definition control #SKTSET – Socket definition control Execute command Read command Reports AT#SKTSET? the current value of the parameters ,, . Write command AT#SKTSET=, , "" Test command AT#SKTSET=? Example This command sets the socket parameters values.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.8.4.7 #SKTOP – Socket Open command #SKTOP – Socket Open Command Execute command Activates the context number 1, proceeds with the authentication with the user ID and AT#SKTOP password previously set with #USERID #PASSW commands, and opens a socket connection with the host specified in the #SKTSET command. Eventually before opening the socket connection it issues automatically a DNS query to solve the IP address of the host name.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Write command Test command Example Note AT#SKTSAV OK …socket parameters have been saved in NVM If some parameters have not been previously specified then a default value will be taken.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.8.4.10 #SKTRST – Socket Parameters Reset Command #SKTRST – Socket Parameters Reset Command Execute command Resets the actual Parameters of the Socket in the NVM of the device to the default AT#SKTRST ones.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9 Easy Camera Extension 5.9.1Camera management 5.9.1.1 #CAMON – Camera ON #CAMON – Camera ON Command Execute command Turns ON the Camera. AT#CAMON Read command Write command Test command Example AT#CAMON OK … camera is now powered up. Reference Telit specifications SW release Version A 5.9.1.2 #CAMOFF – Camera OFF #CAMOFF – Camera off Command Execute command Turns OFF the Camera.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.1.3 #TPHOTO – Camera Take Photo #TPHOTO – Camera Take Photo Command Execute command Commands the CAMERA to take the photo and stores it in the TRIZIUM memory. AT#TPHOTO Read command Write command Test command NOTE Example The photo is kept in the TRIZIUM RAM memory, therefore after a power off it is lost. There's only 1 position for the photo, every photo will overwrite the previous.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.1.5 #OBJL – Object List #OBJL– Object List Command Execute command Read command Write command AT#OBJL="" Test command NOTE Example Reports the list of the objects stored in the TRIZIUM memory. Parameter: - a string parameter which specify the object listed. "IMG" - Image object (it is the only string supported). Returns the list of the stored objects: #OBJL: Snapshot, where Snapshot - is the name of the object.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.1.7 #CAMQUA – Camera Select Quality of Photo #CAMQUA - Camera Select Quality of Photo Execute command Read command Reports the current value of the parameter AT#CAMQUA? Write command This command sets the quality of the photo stored on the memory of the TRIZIUM AT#CAMQUA= Parameter: - photo quality 0 - low (Jpeg compression high - low quality of picture) 1 - medium (Jpeg compression medium - med.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.1.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.2Email management 5.9.2.1 #ESMTP – Email SMTP server 6.10.2.1 #ESMTP – Email SMTP server Execute command Read command Reports AT#ESMTP? the current value of the parameter Write command AT#ESMTP="" Test command AT#ESMTP=? Example This command sets the SMTP server used for EMAIL sending. SMTP server can be specified as IP address or as nick name.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.2.2 #EADDR – Email sender address 6.10.2.2 #EADDR – Email sender address Execute command Read command Reports the AT#EADDR? current value of the parameter Write command AT#EADDR="" Test command AT#EADDR=? Example This command sets the sender address string to be used for sending the Email. Parameter: - sender address - any string value up to max length reported in the Test command.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.2.3 #EUSER – Email authentication USER NAME 6.10.2.2 #EUSER – Email authentication USER NAME Execute command Read command Reports the current value AT#EUSER? of the parameter Write command AT#EUSER="" Test command AT#EUSER=? Example This command sets the user identification string to be used during the authentication step of the SMTP to be the string .
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.2.4 #EPASSW – Email authentication PASSWORD 6.10.2.2 #EPASSW – Email authentication PASSWORD Execute command Read command Write command AT#EPASSW="" Test command AT#EPASSW=? Example This command sets the user identification string to be used during the authentication step of the SMTP to be the string . Parameter: - authentication Password for Email - any string value up to max length reported in the Test command.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.9.2.5 #SEMAIL - Send Email #SEMAIL - Send Email Execute command AT#SEMAIL = "",""," Sends an Email message . Parameter: - destination address - subject of the message - attach image flag 0 - don't attach any image 1 - attach the snapshot taken (must be already been taken…) The device responds to the command with the prompt '>' and awaits for the message body text.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.10 Easy Scan Extension 5.10.1 Easy Scan custom AT commands 5.10.1.1 *CSURV - Network Survey of the complete 900/1800/1900 Network *CSURV – network survey of the complete GSM900/1800/1900 Network The command allows to perform a quick survey through both GSM900 and Execute command DCS1800 or PCS1900 Bands (full band scan). After this the following information AT*CSURV for every received BCCH is available.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 Test command Example AT*CSURV Network survey started… arfcn: 48 bsic: 24 rxLev: -52 ber: 0.00 mcc: 610 mnc: 1 lac: 33281 cellId: 3648 cellStatus: CELL_SUITABLE numArfcn: 2 arfcn: 30 48 numChannels: 5 array: 14 19 22 48 82 arfcn: 14 level: 8 Note Reference SW release Network survey ended OK The command is executed within max. 2 minute. Telit Specifications.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.10.1.2 *CSURVC - Network Survey in computer friendly format *CSURVC – network survey in computer friendly format The command allows to perform a quick survey through both GSM900 and Execute command DCS1800 or PCS1900 Bands (full band scan). The format is computer friendly.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.10.1.3 *CSURVU - Network Survey of user defined 900/1800/1900 channels *CSURVU – network survey of user defined GSM900/1800/1900 channels Execute command Read command Write command The command allows to perform a quick survey of user defined GSM900/DCS1800/PCS1900 channels. It scans the given channels. The result AT*CSURVU format is the same like the full band scan (AT*CSURV).
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.10.1.4 *CSURVUC - Network Survey in computer friendly format *CSURVUC – network survey of user defined channels in computer friendly format Execute command Read command Write command The command allows to perform a quick survey of user defined AT*CSURVUC GSM900/DCS1800/PCS1900 channels. It scans the given channels. =,,…, The format is computer friendly. Parameter: = channel number The max.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 5.11 Jammed Detect & Report Extension 5.11.1 Overview The Jammed Detect & Report feature allows a Telit TRIZIUM to detect the presence of a disturbing device such as a Communication Jammer and give indication to the user and/or send a report of that to the network. This feature can be very important in alarm, security and safety applications that rely on the module for the communications.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 has occurred. 3 - the TRIZIUM will make both the actions as for mode=1 and mode=2. 4 - the Jammed Detect is active and the Jammed condition is reported with an unsolicited code every 3s on serial line, whose format is: #JDR: JAMMED - Jammed condition detected #JDR: OPERATIVE - Normal Operating condition restored. Note: the #JDR: OPERATIVE code will show only once and after a jammed condition has occurred.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 6 Conformity Assessment Issues The Telit TRIZIUM module is assessed to be conform to the R&TTE Directive as stand-alone product, so If the module is installed in conformance with Dai Telecom installation instructions require no further evaluation under Article 3.2 of the R&TTE Directive and do not require further involvement of a R&TTE Directive Notified Body for the final product.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 6.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 6.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 7 TRIZIUM Technical Support Telit technical support to Telit TRIZIUM modules customer is included into the dedicated Website (www.TRIZIUM.com) and official Website (www.telit.net) which contains also all available technical documentation download, application examples, Telit engineering support accessible via selective E-Mail (ts-trizium@telital.com) service with 24 hr replies assured.
Telit TRIZIUM Product Description 80264ST10007a Rev.
Telit TRIZIUM Product Description 80264ST10007a Rev.
Telit TRIZIUM Product Description 80264ST10007a Rev. 4– 09/09/04 9 Document Change Log Revision DRAFT DRAFT #2 ISSUE#1 ISSUE#2 Date 01/10/03 17/12/03 12/02/04 31/05/04 Changes Draft for comments Final mechanical and Electrical design inserted Release First ISSUE#1 Added Easy Scan Features Added Easy Script Features Par. 2.8 Note added. ISSUE#3 02/09/04 ISSUE#4 09/09/04 Par. 5.5.3.1 +CNMI - new message indication to Terminal Equipment updated. Par. 2.1 Dimensions - mechanical design updated Par. 2.
