User's Manual
Table Of Contents
- 1 Introduction
- 2 Shipping Case Contents
- 3 APS-NR2 Overview
- 4 Initial set up
- 5 Basic Configuration of the APS-NR2 for RTK
- 6 Configuring the output
- 7 Set the Antenna Height
- 8 Finalizing the configuration
- 9 Retrieving the collected data from the receiver
- 10 Hot Swapping the batteries and charging
- 11 System Administration using the Web Interface
- 12 Appendix
4 | P a g e
1 Introduction
1.1 Foreword
You made an excellent choice buying the Altus Positioning Systems Network Rover.
Don’t drop the call!
Do not lose time with dropped calls. Your source of corrections is most secure with
APS-NR2.
It has been designed with a dual antennae cell modem to optimize call retention.
Light
Despite its smarts on board and the wireless technologies the APS-NR2 only weighs
760 grams and measures only 167mm in diameter.
Work all day
The batteries of the APS-NR2 are hot swappable.
With the two batteries in the device and the two spares you will span more than a
full working day!
The charger and batteries are non proprietary so it is easy and inexpensive to keep
spares.
Use your existing phone or tablet
The APS-NR2 communicates with any device having a Wi-Fi radio.
Simply connect to the APS-NR2, open your browser and your APS-NR2 is configured
within minutes.
Esri ready
The APS-NR2 has been designed specifically for users of ArcGIS to enrich their
database with highly accurate positions. Alternatively you may use the APS-NR2
with industry leading survey software like SurvCE, Field Genius or Digiterra.
Works in any network
The APS-NR2 works within all types of RTK networks. Its auto detect function
selects the correction type!