User's Manual

Table Of Contents
41 | P a g e
11.1.1.2.1 Copy Configuration File
1. Select the configuration to be copied in the Source drop down box.
2. Select where the Source configuration is to be copied into using the Target drop
down box.
3. Click OK
11.1.1.2.2 Download Configuration
1. Click the next to the configuration to be downloaded.
2. The download is started immediately.
3. The configuration can be found in the browser's download folder.
11.1.1.2.3 Upload Configuration
1. Click the next to the configuration to be uploaded.
2. A window pops up for the user to select a file.
3. After a file has been selected the upload is started immediately.
If the uploaded file contains invalid commands, the complete file is ignored and the
configuration remains unchanged.
11.1.1.3 Intermediate saving of the Configuration
After each change made to the APS-NR2's configuration while executing the steps in the
following sections a pop up will appear in the bottom right of the browser window.
If the user wants to make the last changes made persistent, the user has to click Save.
Figure 30: Save to Boot pop up