User's Manual
Table Of Contents
- 1 Introduction
- 2 Shipping Case Contents
- 3 APS-NR2 Overview
- 4 Initial set up
- 5 Basic Configuration of the APS-NR2 for RTK
- 6 Configuring the output
- 7 Set the Antenna Height
- 8 Finalizing the configuration
- 9 Retrieving the collected data from the receiver
- 10 Hot Swapping the batteries and charging
- 11 System Administration using the Web Interface
- 12 Appendix
14 | P a g e
3.2 Power Button Functions
APS-NR2 power status
User Action
Effect
While the device is off
CLICK
Switches on the APS-NR2
HOLD
4 seconds
Resets the device to factory default
While the device is on
CLICK CLICK
Toggles the Wi-Fi radio on and off
CLICK
Toggles logging on and off
The LED only switches on if
messages have been selected for
logging
HOLD
2 seconds
Powers off the device