User's Manual
Table Of Contents
- Noise is heard
- A Phone problem may exist
- Check microphone’s proper working order
- Check routing of microphone cable
- Check microphone and contacts
- Check speaker location
- Check speaker’s proper working order
- No reception
- 1 Carphone kit
- 2 Installation Diagram
- 3 Carphone layout
- 4 Preplanned Accessory Positioning
- 5 Installing the Cradle and Phone
- 6 Trouble Shooting
- 7 Appendix
User Guide
989889789789 Rev.2 – YYYY-MM-DD
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 24 of 27
Mod. 0810 2011-07 Rev.2
3.8. Settings
Sounds
Sound for Ringtone
Select a sound from your sounds list to use as a ringtone:
Press
-L
and select the desired sound.
Scroll with through the list.
Press
-L
to select the chosen sound.
Volume
Press
-L
Choose volume for Ringer / Voice / Key Tone.
Press
-L
to confirm.
Sound for Keypad
Press
-L
and select Off or Beep.
Press left soft key
-L
to confirm.
Alerts
Press
-L
and select Off/On to Connect Call or to
Disconnect Call.
Display
Banner Text
To change the displayed text banner in Idle mode, to your preferences.
Press
-L
Press and scroll with between ON/OFF.
To choose the color of the banner press
Scroll with through the list.
To edit the banner text, press .
Edit your banner text.
Press left soft key
-L
to confirm.
Display Contrast
To adjust the contrast of your car phone’s display:
Press
-L
Scroll with through the list.
Press
-L
to confirm.
Keypad light intensity
To adjust the keypad light timeout:
Press
-L
Scroll with through the list.
Press
-L
to confirm.