User's Manual

User Guide
989889789789 Rev.2 – YYYY-MM-DD
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 17 of 27
Mod. 0810 2011-07 Rev.2
3.2. Power Control
When installed properly, the phone powers on and off automatically using the car's ignition
switch. For manual operation press and hold the power key (
) until the display panel
lights on/off. Enter your PIN and press (if necessary).
3.3. Volume Control
When call is inactive, press the volume keys located on the side of the phone to set the Ring
Tone Volume.
3.3.1. Call Volume
During a call, press either of the volume keys on the side of the phone to adjust the call
volume.
3.3.2. Muting Microphone
During a call, press
-R
to mute the microphone. To Unmute the microphone, press this
key again.
3.3.3. Key Volume
Press the
-L
 Settings  Sounds  Volume  Key Tone, and
adjust the volume with the up or down keys.
3.4. Menu Access and Navigation
Use the 4-way navigation key to navigate the menu system and change feature settings.
You can navigate graphic menus in any direction – right, left, down and up. The primary
movements within list menus are down and up. To change settings in list menus, navigate the
datebook or edit text, you can also move left and right.
To access your phone’s menus:
1. In Idle mode, press
-L
to access Menu mode.
2. Use the key to scroll to a menu or option.
3. Press
-L
or key to confirm the highlighted option.
4. Press
-R
to move up one level; Press to return to Idle mode.
Note
When you access a menu requiring the PIN2, you must enter the PIN2 supplied with the SIM
or USIM card. For details, contact your service provider.