User's Manual
Table Of Contents
- Noise is heard
- A Phone problem may exist
- Check microphone’s proper working order
- Check routing of microphone cable
- Check microphone and contacts
- Check speaker location
- Check speaker’s proper working order
- No reception
- 1 Carphone kit
- 2 Installation Diagram
- 3 Carphone layout
- 4 Preplanned Accessory Positioning
- 5 Installing the Cradle and Phone
- 6 Trouble Shooting
- 7 Appendix
Mounting instructions
5.7.3 Possible positions
5.7.4 Installing the Coaxial Cable
1. Direct the antenna’s coaxial cable along the car beam. Ensure the antenna cable does
not get damaged.
2. When completing the cables installation and reaching close to the device coaxial cables
SMA female connector attach both connectors together.
3. Roll the remaining cable.
4. Examine the antenna and cables properly installed.