User's Manual
Table Of Contents
- Noise is heard
- A Phone problem may exist
- Check microphone’s proper working order
- Check routing of microphone cable
- Check microphone and contacts
- Check speaker location
- Check speaker’s proper working order
- No reception
- 1 Carphone kit
- 2 Installation Diagram
- 3 Carphone layout
- 4 Preplanned Accessory Positioning
- 5 Installing the Cradle and Phone
- 6 Trouble Shooting
- 7 Appendix
Mounting instructions
• Ensure the Phone would be protected from direct sunlight and humidity (air
conditioner openings).
• Ensure the Phone would be protected from mechanical damage by the car’s
accessories.
5.2 Installing the Cradle and Phone
1. Disassemble the cradle into its two parts.
2. Install one of the cradle parts in the determined location in the car with 4 tin
screws.
Note!
If you are not able to locate the cradle properly, please use a adjustable
bracket from the station inventory.
3. Install the second cradle part on the handsfree Phone, using the 4 philips screws
provided with this kit.
Note!
Only use the original screws provided with this kit.
4. Connect the two cradle parts.
5. Direct the control cable coming out of the Phone behind the car panel.