User Guide

ME910G1 Preliminary HW Design Guide
1VV0301593 Rev.2 Page 28 of 95 2020-01-13
NOTE:
The Operating Voltage Range MUST never be exceeded; care must
be taken when designing the application’s power supply section to
avoid having an excessive voltage drop.
If the voltage drop is exceeding the limits it could cause an
unintentional power off of ME910G1 module.
The Power supply must be higher than 3.20 V to power on the
ME910G1 module.
Overshoot voltage (regarding MAX Extended Operating Voltage) and
drop in voltage (regarding MIN Extended Operating Voltage) MUST
never be exceeded;
The “Extended Operating Voltage Range” can be used only with
completely assumption and application of the HW User guide
suggestions.
NOTE:
For PTCRB approval on the final products the power supply is
required to be within the “Normal Operating Voltage Range”.