User's Guide

ME910C1 HW User Guide
1VV0301351 Rev. 2 Page 23 of 81 2017-07-19
Power Consumption*
*Preliminary data
NOTE: The electrical design for the Power supply should be made
ensuring it will be capable of a peak current output of at least:
0.8 A for LTE mode (3.80V supply).
Mode Average
(mA)
Mode Description
Switched off 0.007mA Module supplied but switched off
IDLE mode
AT+CFUN=1 11.80 mA Normal mode: full functionality of the module
AT+CFUN=4 11.80 mA Disabled TX and RX; module is not registered on
the network
AT+CFUN=5 1.20 mA 2.56 secs DRx cycle
0.90 mA 81.92 secs DRx cycle
11.80mA RRC_CONNECTED (10.24 secs C-DRX)
0.70 mA RRC_IDLE (43.69 minutes I-DRx cycle)
Operative Mode
LTE Data call 130mA Channel BW 10MHz, RB=1, TX=0dBm
145mA Channel BW 10MHz, RB=1, TX=20dBm
190mA Channel BW 10MHz, RB=1, TX=23dBm
PSM Mode
AT#PSM=1 0.007mA No current drain from PSM pins
GPS
GNSS 29.00 mA GNSS Standalone 1Hz Tracking ( Non-Dpo)